Diagnostics and control SMART, 38 DL PLUS, IPLEX FX, etc.

IRIS Power LP Generator Stator Winding Monitoring System

The generator stator winding monitoring system manufactured by IRIS Power is a cost–effective technical solution for continuous monitoring of partial discharge in engines, generators, switchgears and dry transformers. Frequency discharges (HR) are small electronic discharges that signal the deterioration of high–voltage insulation.

• IRIS Power LP. Technical specifications.

Equipment for radiation control method

Radiation monitoring is a type of non–destructive testing based on the registration and analysis of ionizing radiation after its interaction with the object of control.

• Equipment for radiation monitoring. Technical specifications.

Equipment for ultrasonic inspection method

Ultrasonic testing does not destroy or damage the test sample, which is its main advantage. It is possible to control products made of a variety of materials, both metals and non-metals. In addition, it is possible to highlight the high speed of the study at low cost and danger to humans (compared with X-ray flaw detection) and the high mobility of the ultrasonic flaw detector.

• Equipment for ultrasonic testing. Technical specifications.

Equipment for visual-optical control method

The analyzed (informational) parameters in the visual-optical method are the spatial-temporal distributions of amplitude, frequency, phase, polarization and coherence (temporal and spatial) of optical radiation. At the same time, defects such as voids (continuity violations), delaminations, pores, cracks, foreign inclusions, internal stresses, changes in the physicochemical properties and structure of materials, deviation from a given geometric shape can be detected.

• Equipment for visual and optical control. Technical specifications.

Equipment for thermal control method

The thermal control method is based on physical phenomena such as thermal fields, infrared heat sources, which can be used to diagnose the presence of external or internal defects. The nature of the excessive temperature field can accurately show the specifics of the violation of the condition of the object under study and will allow you to take the necessary measures to prevent malfunctions in time.

• Equipment for thermal control. Technical specifications.

Equipment for acoustic emission control method

The method is based on the emission and registration of stress waves during rapid local restructuring of the material structure. Defects that occur and develop in the material during operation cause a concentration of deformations. If, during loading, the local overvoltage strain caused by the presence of a defect exceeds the threshold level for emission, acoustic emission occurs.

• Equipment for acoustic emission control. Technical specifications.

Metal Analyzers

Analyzers (spectrometers) are measuring equipment for the analysis of the chemical composition of metals and alloys. Spectrometers provide an accurate determination of the percentage of elements (ppm values) during the identification and sorting of alloys.

• Metal analyzers. Technical specifications.

Vibration diagnostics

Vibration diagnostics is a non—destructive testing method based on the analysis of a set of vibration parameters to determine the condition of equipment.

• Equipment for vibration diagnostics. Technical specifications.

Doble Engineering Diagnostic Equipment

Doble Engineering diagnostic equipment is a complete solution for functional diagnostics.

• Doble Engineering. Technical specifications.